The Inspeed/MadgeTech Wind Speed Data Logging Kit includes the following:

• Inspeed Vortex Wind Sensor with 25 feet of wire (more on request)
• MadgeTech Pulse110 battery-powered data logger
• MadgeTech IFC110 cable and software for downloading and viewing wind speed data.

This data loggging kit allows you to set up the data logger from your PC or laptop to collect up to 16,123 intervals of wind speed data. Each interval is an increment of time that you select. The data logger stores the number of rotor rotations during each interval, which is proportional to the AVERAGE wind speed during that interval. The end result is a collection of data points, each of which represents the average speed over that interval. The average speed is the ONLY information captured for each interval.

Intervals range from 2 seconds to 12 hours, and up to 16,383 can be stored in a single run. This means that the data logger can be left unattended from 9 hours (16,383 intervals at 2 seconds per interval) to "22 years" (16,383 intervals at 12 hours per interval).

Setting up the data logger is simple, using the software provided. Downloading the data is also simple with the MadgeTech software.

Further details on the MadgeTech Wind110 wind speed data logger can be viewed at www.madgetech.com

 

 

SENSOR TYPE	3-Cup plastic rotor
SENSOR RANGE	Up to 125+ MPH
DISPLAY	There is a Sigma Sport BC1200 bicycle computer display with the Madgetech Kit. The BC1200 displays current wind speed and stores max & average until manually reset.
DATA RATE	User selectable from 2 seconds to 12 hours. up to 100 pulses per second capture rate (equivalent of over 250 mph...) up to 4 millions pulses counted per interval The Madgetech data logger counts pulses (rotations) during each interval. A simple math formula converts pulses/interval to average wind speed during that interval.
POWER	BC1200 Display: CR2032 lithium coin battery Pulse 110 Data Logger: 10-year enclosed battery
COMPUTER INTERFACE	USB
SOFTWARE	Windows 95/98/NT/ME/2000/XP based software
MOUNTING	The wind sensor is equipped with an aluminum mounting bracket with 2 holes. Weather-proof enclosure for the BC1200 display and the data logger. Set up the data logging by connecting the logger to a PC with the cable supplied, and simply connect the 2 wires from the wind sensor to collect wind data. Starting and stopping the data logger is done from the PC.
ACCURACY	+/-4% from 10 to 50 mph; a few tenths from 4 to 10 mph. Presumed accurate to within 4% to over 100 mph.
ROTOR DIAMETER	approx. 6 in (152 mm)

If you open the box and the data logger is not what you wanted or expected, return it within 2 weeks in as-new condition for a 100% refund (not including shipping). We provide a 1 year 100% warranty on any defective parts and/or any failure resulting from normal use.

Click here to view the Instructions for use with an Inspeed Rotor

Click here to view the Madgetech Manual (large file: 4 MB!)